Technicqll glue PP PE PTFE 8g+8ml

Brand: OEM
Product Code: 91-471
Availability: Vilnius Store In Stock
Kaunas Store In Stock
Central Warehouse In Stock
11.20€
Ex Tax: 9.26€

Qty

Kit for joining polyolefins and other difficult-to-bond materials (PTFE, silicones) with smooth, matched surfaces. Contains a primer increasing the surface tension of polyolefins and a modified cyanoacrylate adhesive. Without Primera, it can be used to bond standard materials.

Characteristics:

  • high adhesive and primer activity
  • brush pack
  • elastic glue
  • high gluing speed

Benefits:

  • strong bonding of plastic elements
  • precise glue application, low glue consumption
  • the possibility of gluing materials with different properties
  • short repair time

Purpose:

Bonding of plastics with low surface energy: polyolefins (PE, PP), PTFE, silicone rubbers. Also intended for gluing: metal, rubber, wood, ceramics, cement, hard plastics, glass, leather, plywood, aluminum. Bonds hard and flexible materials. Also used for bonding metal combinations “metal + rubber, plastics + rubber, paper + plywood + glass, etc.

Parameters:

  • Viscosity: 40cP (mPas)
  • Shear strength: min. 3.0MPa
  • max. gap to be filled: 0.10 mm
  • Temperature range: -550C to 800C
  • Shelf life: 12 months

Usage:

  1. Clean and matte the glued elements.
  2. Degrease the surface (P-102 or P-959 Technical Degreaser). The surfaces should be clean and free of dirt.
  3. Apply a thin, even layer of BASE primer to the surfaces to be glued.
  4. Wait 2-3 minutes.
  5. Apply a thin, even layer of glue to one of the surfaces (the less glue, the stronger the bond).
  6. Connect the elements immediately, press and hold for a few seconds.
  7. Do not move or adjust the connection.