STLINK-V3PWR two-in-one debugger probe

Brand: STMicroelectronics
Product Code: AN-22948
Availability: 4-6 business days
Planned delivery date after ordering: 2025-04-08
158.00€
Ex Tax: 130.58€

Qty

Source Measurement Unit and debugger/programmer for STM32 microcontrollers. The device has a programmable voltage source in the range of 1.6 V to 3.6 V and a rated output current of 500 mA with overcurrent protection from 550 mA. The probe has a dynamic current measurement function (from 100 nA to 550 mA) and power (from 160 nW to 1.65 W). The bandwidth is 50 kHz, the acquisition is 1.6 MHz, and the accuracy is 2%. The board supports many communication protocols, including JTAG, UART and I2C. The device has a USB Type-C connector enabling updating the unit's firmware and programming STM32 microcontrollers.

Specification:

  • Manufacturer: STMicroelectronics
  • Model: STLINK-V3PWR
  • Supply voltage: 5 V
  • Output voltage: 1.6 V to 3.6 V (programmable)
  • Rated output current: 500 mA
  • Dynamic current measurement: from 100 nA to 550 mA
  • Dynamic power measurement: from 160 nW to 1.65 W
  • Overcurrent protection: from 550 mA
  • Auxiliary source output voltage: 1.6 V to 3.6 V
  • Maximum auxiliary source current: 2 A
  • Auxiliary source overcurrent protection: from 2.5 A
  • Frequency response: 50 kHz
  • Acquisition: 1.6 MHz
  • Accuracy: 2%
  • Communication protocols: JTAG (up to 20 MHz), SWD (up to 10 MHz), UART (up to 12 MHz)
  • Multi-channel USB bridge to SPI, I2C, CAN, GPIO
  • Connector: USB type C (5 V / 3 A max)

Set includes:

  • STLINK-V3PWR
  • 2x male-male cable
  • 2x male-female cable
  • 1x STDC14 to MIPI10 cable
  • 1x STDC14 to STDC14 cable
  • 1x STDC14 to MIPI20 cable