SparkFun Thing Plus, ESP32-S2 WROOM, SparkFun WRL-17743

Brand: Sparkfun
Product Code: AN-19506
Availability: Temporarily Out Of Stock
40.20€
Ex Tax: 33.22€
The SparkFun ESP32-S2 WROOM Thing Plus module is a Feather-sized board featuring 2.4 GHz WiFi communication. Additionally, it is equipped with a cryptographic chip which, unlike the standard ESP32 and ESP8266 chips, allows encryption of wireless communication for secure network traffic. The board is additionally equipped with a Li-Pol battery charger chip through the JST 2.0 connector, through which the module can also be powered from the battery. ESP32-S2 supports a DVP camera interface, LCD interface and integrated temperature sensor. Additional Qwiic connector allows for connection of I2C devices. The Thing Plus module has 320 kB of SRAM and 128 kB of ROM, as well as 4 MB of SPI Flash embedded memory. There are 21 GPIO pins, a cryptographic chip, Qwiic connector, JST and USB C for programming and powering the board.

Specification:

  • Chip: ESP32-S2
    • LX7 Xtensa single-core microprocessor up to 240 MHz
      • RISC-V ULP coprocessor
      • 128 kB ROM and 320 kB RAM
      • 4 MB of embedded SPI Flash memory
    • cryptographic hardware accelerators:
      • AES, ECB / CBC / OFB / CFB / CTR, GCM, SHA, RSA and ECC (digital signature)
    • physical security features:
      • transparent encryption of external Flash memory and RAM (AES-XTS)
      • Secure Boot feature ensures that only signed firmware (with RSA-PSS signature) will boot
      • HMAC and Digital Signature modules use keys not available in the software to generate SHA-MAC and MAC signatures
    • integrated 2.4 GHz WiFi 802.11 b/g/n transceiver module (up to 150 Mbps)
    • integrated temperature sensor: from -20 °C to 110 °C
    • operating voltage: from 3.0 V to 3.6 V
      • WiFi: 310 mA
      • sleep mode: 550 µA
      • deep sleep mode: 20 to 230 µA
  • 21 GPIO pins:
    • 16x ADC channels 12-bit
    • 2x 8-bit DAC channels
    • 14x capacitive touch detection
    • 4x SPI
    • 1x I2S
    • 2x I2C
    • 2x UART
    • 8x PWM channels
  • Li-Pol JST 2.0 battery connector
  • Qwiic connector
  • USB C connector
  • JTAG PTH pins
  • Dimensions: 64.7 x 22.8 mm