SOFT START MODULE

The softstarter is intended for the so-called soft start of devices powered by 230V mains voltage. 50Hz. The system prevents the generation of a current pulse in the transformer windings. that appears when you turn it on to the network. This impulse matters. when the transformer power is greater than 200W. When connecting a system with a high-power transformer to the network. connected to it by a bridge and capacitors. the current consumed by it is greater than its rated current. causing the fuses to trip. which will disconnect our power supply.

This is especially troublesome in the case of. when a computer and a machine controller are connected to one power strip. If the fuse trips, the computer will turn off, causing the loss of unsaved data. By using the Softstarter system, we eliminate this situation and we can work without any worries on the computer and machine controller connected to one power strip (one fuse). When the device is connected to the mains, current initially flows through high-power resistors (causing a soft start). and then the relay turns on all the power to the receiver and it is fully powered.

The soft starter is made on the basis of a generally available transformerless power supply application. The entire system and the transformer connected to it are protected by a 5A fuse. The transformer power can reach up to 2kW (then the fuse should have a value > 9A).

ARK 1.5 mm² connectors with a maximum voltage of 250V and a forward current of 16A were used to make connections to external devices. Components. from which the Softstart module is made meet the European Union's RoHS directive (Restriction of use of certain Hazardous Substances) regarding environmental protection. The device is made using lead-free technology. The binder used to assemble the device contains 99% tin and 1% copper.

• low cost.
• small dimensions.
• 230 V AC power supply. 50 Hz.
• possibility of connecting a transformer with a power of up to 2kW.
• versatility of applications.
• simple operation.
• easy assembly.
• favorable price/quality/opportunity ratio

The dimensions from the table are marked in the drawing below:

Operation of the Softstart module

To properly install the Softstarter system into the application, simply power it with 230VAC and connect the primary winding of the transformer to the TRAFO pins. The diagram is shown below.

Attention !!!
There is dangerous mains voltage on the board. Connections and maintenance of the soft start module should be made with the power supply disconnected.

At higher transformer powers, the resistors on the board may heat up. This should be taken into account when installing the module in the controller housing.

Suggested diagram of the electrical installation for powering the CNC controller based on elements from our company's offer.

In case the Softstart module does not work properly. the first step should be to check whether the problem is electrical or mechanical (lack of connections). It is important to. to document every step in solving the problem. You may need to use this documentation at a later date. and the details contained therein will greatly help our Technical Support employees solve the problem.

Installation personnel must have basic knowledge of how to handle electrical equipment. The device should be installed in closed rooms in accordance with environmental class I. with normal air humidity (RH = 90% max. without condensation) and temperature in the range of 0°C to +50°C.

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 70€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.

Paid orders of more than 100€ are shipped for free to Latvia and Estonia.

Product availability status:

Vilnius Store In Stock - the product is at the store, Vytenio str. 20 in Vilnius and can be picked up / purchased at same day;

Kaunas Store In Stock - the product is at the store, Pramonės pr. 4D in Kaunas and can be picked up / purchased the same day;

Central Warehouse In Stock - In stock, product will be shipped in a short time 1-2 work days;

1-2 work days - product will be shipped in a short time - 1-2 business days;

2-3 work days – we don’t have selected product in local warehouse. Shipping time is only 2-3 work days;

3-5 work days – we don’t have selected product in local warehouse. Shipping time is between 3-5 work days;

3-7 work days – we don’t have selected product in local warehouse. Shipping time is between 3-7 work days;

Out of Stock – selected product is sold out at the moment, but you can apply for automatic alert by email when product will be in stock.