Smoke sensor detector XD20 230V

Brand: Blow
Product Code: 60-641
Availability: 4-6 business days
Planuojama gavimo data po užsakymo: 2025-05-09
11.90€
Ex Tax: 9.83€

Qty

DEVICE TEST
NOTE!!! In order to maintain the proper operation of the device, the device should undergo regular inspections and be tested regularly!
SELECTING AN INSTALLATION LOCATION
To ensure maximum protection, it is recommended to install the device in all rooms and on each level of the residential building (both where there are devices or installations that may constitute a potential source of fire, but also in other rooms).
USEFUL LIFE OF THE DEVICE
The average useful life of the device (electronic sensor) is about 5 years. This time is strictly depends on the environmental conditions in which the device was working, date of production, number of activations alarm, etc.) It is recommended to regularly replace old models with new ones.
SAFETY TIPS
In order to minimize the risk of fire, it is necessary to have the following services carried out regularly (at least once every six months): qualified specialists to check the heating system, ventilation system, chimneys and exhaust fumes from fuel-powered appliances. All heating appliances must always be installed in accordance with manufacturer's recommendations and follow local building codes. All devices should be installed and checked by specialists after installation. Pipe connections should be checked regularly supplying fuel or exhausting exhaust gases, for any leaks, cracks, or marks rust, etc. It is essential that all household members are familiar with the alarm devices used in the installation.
ALARM TRIGGER

When the alarm is triggered, you should: - IT IS IMPERATIVE TO LEAVE THE SMOKE-FILLED ROOM IN WHICH THE ALARM WAS TRIGGERED - Contact the Fire Department or Police - If you notice any symptoms of poisoning (e.g. headache) in yourself or any of the household members, you should definitely contact your doctor - In the event of a false alarm, check the correctness of the installation and the selected location. device installation DEVICE FEATURES - High quality photoelectric sensor
- Power supply from the 230V 50Hz mains, in the event of a power failure the device is powered by a 6LR61 9V battery - Alarm signaling with sound and visual indicator - Built-in function to test the unit electronics and verify proper operation of the device and reset the device in the event of an alarm. - Signaling the need to replace the battery (sound signal repeating cyclically at regular intervals - approximately 40 seconds) - Power saving function - High effectiveness of action SPECIFICATION - Power supply: 230V AC / emergency 6LR61 9V battery (battery included) - Sensor type: photoelectric - Standby current consumption: >10uA - Current consumption during alarm: >10mA - Volume: >80 dB - Permissible ambient temperature: -10°C ~ 50°C - Allowable ambient humidity: 10% ~ 90% RH