AlphaBot Bluetooth - Arduino Robot Building Kit with Sensors

Brand: Waveshare
Product Code: AN-08358
Availability: Temporarily Out Of Stock
108.70€
Ex Tax: 89.84€

This kit comes with controller board UNO PLUS, AlphaBot robotic platform (line tracking, obstacle avoidance, speed measuring, IR control), ultrasonic sensor, Bluetooth module, and a versatile Arduino accessory shield.
While utilizing UNO PLUS as controller board, this kit is based on the Arduino software/hardware open source platform. Combined with the modular design, it's an ideal platform to get started with Arduino robot.


UNO PLUS Features
UNO PLUS is a development board compatible with the Arduino UNO R3, an improved & enhanced alternative solution for Arduino UNO R3.


AlphaBot Features
•    Raspberry Pi/Arduino interfaces, works with either one separately, or both
•    Arduino extend header, supports Arduino shields
•    Modular design, plug-and-play modules like line tracking, obstacle avoidance, speed measuring, etc. eliminating the trouble of connecting mess wires.
•    LM298P motor driver with diode protection circuit, more safety
•    LM2596 voltage regular, provides stable 5V power to the Raspberry Pi/Arduino
•    TLC1543 AD acquisition chip, allows the Pi to use analog sensors


Accessory Shield Overview
•    Accessory Shield integrates common used accessories/components listed as follows :
•    Joystick (5 directions)
•    Adjustable potentiometer
•    Buzzer
•    RGB LED
•    Temperature sensor
•    3-axis digital accelerometer
•    High precision RTC
•    0.96inch OLED
•    XBee interface


What's on the UNO PLUS
•    ATMEGA328P-AU
•    AMS1117-3.3 : 3.3V voltage regulator
•    NCP1117ST50T3G : 5V voltage regulator
•    FT232RL : USB to UART convertor
•    Arduino interface
•    compatible with standard Arduino interface with two additional analog inputs A6 (config the CFG), A7
•    solder pads provided, supports prototype breadboard
•    ICSP interface
•    MICRO USB connector : for uploading program OR serial port debugging
•    Power output header : 3.3V OR 5V, voltage level configured by the onboard power configuration switch, used as power output OR common-grounding with other boards
•    FT232 pins : for burning Bootloader into the microcontroller
•    DC input : 7V ~ 12V
•    Reset button
•    Power indicator
•    Serial port Rx/Tx indicator
•    User LED
•    500mA fast self-recovery fuse
•    Power configuration : for configuring the operating voltage
•    Bootloader selection switch
•    turn ON : the board will reset when power-up OR other USB devices were detected connecting to the PC
•    turn OFF : the onboard program runs immediately when power-up, and the board will not reset when other USB devices were detected connecting to the PC


What's on the AlphaBot Mainboard
•    Raspberry Pi interface: for connecting Raspberry Pi
•    Arduino interface: for connecting Arduino
•    Motor interface
•    Ultrasonic module interface
•    Servo module interface
•    Obstacle avoidance module interface
•    Speed measuring interface
•    Battery holder: supports 18650 batteries
•    Reserved power input (not soldered): for connecting other external power supply
•    Arduino expansion header: for connecting Arduino shields
•    UART interface: for connecting Bluetooth module, to control the robot remotely via Bluetooth
•    SPI interface: for connecting NRF24L01 wireless module
•    Line tracking module interface
•    TLC1543: 10-bit AD acquisition chip, allows the Pi to use analog sensors
•    LM298P: dual H bridge motor driver chip, up to 2A current
•    Anti-reverse diode
•    Power switch
•    LM2596: 5V regulator
•    Power indicator
•    UART switch: turn on to enable serial communication between Raspberry Pi and Arduino
•    IR receiver: control the robot remotely via infrared
•    Raspberry Pi/Arduino selection: select the Raspberry Pi or Arduino to control the robot peripherals


Development Resources
•    Wiki : www.waveshare.com/wiki/AlphaBot
•    Wiki : www.waveshare.com/wiki/UNO_PLUS



Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-2 w.d.) price for items of any size is through through courier service is 4.50€ (incl. VAT). 

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.50€ incl. VAT.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.50€ incl. VAT.

Payment on delivery +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

other - negiotiated individually.

International delivery pricing to Omniva parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.

Paid orders of more than 100€ are shipped for free to Baltic countries.


Product availability status meaning:

Vilnius Store In Stock - the product is at the store, Vytenio str. 20 in Vilnius and can be picked up / purchased the same day;

Kaunas Store In Stock - the product is at the store, Pramonės pr. 4D in Kaunas and can be picked up / purchased the same day;

Central Warehouse In Stock - In stock, product will be shipped in a short time 1-2 work days, there is no possibility to pickup on the spot;

1-2 work days - product will be shipped in a short time - 1-2 business days;

1-2 work days – we don’t have selected product in stock. Shipping time is only 1-2 work days;

3-5 work days – we don’t have selected product in stock. Shipping time is between 3-5 work days;

3-7 work days – we don’t have selected product in stock. Shipping time is between 3-7 work days;

Out of Stock – selected product is sold out at the moment, but you can apply for automatic alert by email when product will be in stock.