RGB LED strip WS2812B -60 LED/m 5V - 5m

Brand: OEM
Product Code: AN-05446
Availability: Vilnius Store In Stock
Kaunas Store In Stock
Central Warehouse Out of Stock
57.30€
Ex Tax: 47.36€

Qty

Individually address RGB LEDs located in a 5m strip with a density of 60 diodes per meter. Each pixel may emit a color from 24-bit palette. One microcontroller's pin is enough to control the module.(for example, Arduino). The LEDs are arranged densely, at a distance of about. 17mm, because of this, the brightness is very high. High power, however, requires powerful power supply. The system is powered by 5 Volts, consumes approx. 3.5A for each meter (18W). The chain has the possibility of crossing each diode. The used communication protocol allows the serial connection of the LEDs. Another chain should be connected to the output connector, combining with each other, respectively, 5V, GND and DOUT with DIN. The manufacturer notes that when working with more than 500 LEDs, it may not be enough RAM in the system the Arduino Uno. You should also note that every following matrix will require increasing the performance of power source.


Installation of the Adafruit library for Arduino:

  1. Download the library from the website GtitHub by clicking the button Download ZIP
  2. Rename the root folder to: Adafruit_NeoPixel
  3. Move the entire folder to the directory that contains the Arduino libraries
  4. Restart the Arduino environment, the library will appear in the menu: File -> Examples
Specification:
  • Supply voltage: 5V
  • Power: 18 W/m
  • Current consumption: 3.5A for 1 meter of chain for a single diode for color white,
  • The LEDs used in the LED-RGB-SMD5050 WS2812b
  • Addressed pixel: 1 led RGB
  • Resistance to external conditions: IP65 (silicone cover)
  • Chain length: 5m
  • Chain width: 10mm