Raspberry Pi power supply PiJuice HAT + battery

Product Code: AN-10599
Availability: Temporarily Out Of Stock
104.10€
Ex Tax: 86.03€

Portable power supply platform for a min-computer Raspberry Pi. The module is based on ARM Cortex-M0. It has the original battery 1820 mAh from the Mororolla Droid 2 with the possibility of expanding with a battery with a capacity of 5000 mAh or even 10000 mAh. The battery can be charged using renewable energy sources such as solar or wind energy.

Technical data:

  • Input voltage: 4.2 V to 10 V
  • Input voltage: from 3.3 V to 5 V
  • Output current: 2.5 A 5 V current depends on the battery capacity to reach a max of 2.5 A need a battery with a capacity of more than 3500 mAh
  • AC I2C address
  • Microcontroller: STM32F030CCT6 ARM Cortex-M0, 48MHz, F64KB, R8KB, I2C, SPI, USART, 2.4-3.6 V
  • Battery: 1820 mAh
  • Layout of the battery charger: battery charger Li-Ion/Pol BQ24160RGET - from 4.2 V to 10 V / 2.5 A
  • System battery levelindicator: LC709203FQH-01TWG - Li-Ion, 1-cell, 2.8 per cent
  • EEPROM: CAT24C32WI-GT3 EEPROM, I2C, 32KBIT, 400KHZ, 1V7-5V5
  • Additional pin spring: Mil-Max 0929-7-15-20-77-14-11-0
  • Optional output for external buttons connected to the same output, SW1
  • Output 6-pin: two GPIO ARM Cortex-M0
  • Outputs for additional solar panels, wind turbines, etc.
  • Extra Shield RF: Harwin S02-20150300
  • Built-in RTC
  • Compatible with: Raspberry Pi 3 / 2 / B+ and Zero and Zero W
  • Smart On/Off switch
  • 2x programmable LED RGBs
  • 3 programmable buttons
  • Dimensions: 65 x 56 x 20 mm
  • Weight: 57 g

Included:

  • PiJucie HAT
  • 1x battery
  • Guide for PiJuice
  • 4x mounting racks
  • 8x screws
  • 1x Pogo pin
  • 3x sticker