Precision laboratory power supply LongWei PS3010DF 0-30V 10A

Brand: LongWei
Product Code: AN-19289
Availability: Temporarily Out Of Stock
81.90€
Ex Tax: 67.69€

Laboratory power supply with precise voltage and current regulation. The LongWei PS3010DF has two potentiometers: Coarse, which is used for coarse setting of the output voltage and current, and Fine allows fine adjustment of these values. The power supply allows you to adjust the voltage from 0V to 30V and the current from 0A to 10A. The device supports C.V (output voltage stabilization) and C.C (output current stabilization) modes, the operation of which is indicated by LEDs. The power supply unit has a three-level LED display that shows the current voltage, current and power parameters. The PS3010DF has a USB Type A port on the front panel.


Description of the buttons that control the laboratory power supply

  • C.V (Constant Voltage) – input voltage stabilization indicator
  • C.C (Constant Current) – output current stabilization indicator
  • V-COARSE - "coarse" adjustment of the output voltage
  • V-FINE - fine adjustment of the output voltage
  • A-COARSE - "coarse" adjustment of the output current
  • A-FINE - fine adjustment of the output current
  • Type A USB socket - 5 V / 2 A
  • ON / OFF - button to turn on the device
  • Black socket (output terminal negative) - output terminal "-"
  • Green socket (Output Terminal Ground) - grounding terminal
  • Red socket (output terminal positive) - output terminal "+"


Specifications:

  • Output Voltage Range: 0V to 30V
  • Output current range: from 0 A to 10 A
  • Operating parameters:
  •         AC voltage 220 V / 110 V ± 10% (switch on the back of the case)
  •         Operating temperature: -10°C to 40°C, relative humidity: ≤ 80% RH
  •         Storage temperature: -20°C to 80°C, relative humidity: ≤ 70% RH
  • Output power: up to 300 W
  • Ripple and noise in C.V and C.C mode
  •         Voltage: ≤ 20 mVrms
  •         Current: ≤ 20 mArms
  • Parameter setting accuracy
  •         Voltage: 0.01 V
  •         Current: 0.01 A
  • Stabilization factor
  •         Voltage (C.V): ≤ 0.1% + 10 mV
  •         Current (C.C): ≤ 0.1% + 10 mA
  • Load Stabilization Factor
  •         Voltage (C.V): 0.1% + 5 mV
  •         Current (C.C): 0.1% + 10 mA
  • Built-in protection against exceeding the permissible values
  •         OCP - overcurrent protection
  •         OVP - voltage protection
  •         OTP - temperature protection
  •         OPP - overload protection
  • Type A USB port located on the front panel
  • Built-in fan in the back panel
  • Handle for transporting the device
  • Dimensions: 285x125x145mm
  • Weight: 1.95kg

In the set:

  • Laboratory power supply LongWei PS3010DF
  • Power cable
  • Crocodile clips