Pololu

Sort By:
Show:
QTR-8RC reflectance sensor array, digital, Pololu 961
The system consists of eight reflective sensors (a pair: IR LED and phototransistor), it was designed to detect black lines on a white background. The reading i..
16.40€
Temporarily Out Of Stock
LIS3MDL 3-axis digital magnetometer I2C/SPI, Pololu 2737
Sensor to measure the magnetic field in 3 axes in the range from ±4 gauss to ±16 gauss. The supply voltage is from 2.5 V to 5.5 V, the sensor is characterized b..
16.40€
Temporarily Out Of Stock
DRV8833, two-channel motor controller 10.8V/1.2A, Pololu 2130
The module based on Texas Instruments DRV8833 is a two-channel direct current bruising controller. The advantage of the system is extremely small dimensions - t..
16.40€
Temporarily Out Of Stock
QTR-8A reflectance sensor array, analog, Pololu 960
The strap can be used in robots such as line follower (detecting the position of the line). It has a built-in MOSFET transistor that allows to disable the senso..
16.40€
Temporarily Out Of Stock
BD65496MUV, single-channel motor controller 16V/1.2A, Pololu 2960
The module based on the BD65496MUV system allows controlling one DC motor. The motor can be powered up to 16 V with a continuous current draw of up to 1.2 A, te..
16.00€
Temporarily Out Of Stock
Force sensor, round, 5mm (0.25''), short connector, Pololu 2727
The sensor reduces its resistance when the force put to the round tip, increases. Due to this phenomenon, and the use of a microcontroller with an analog to dig..
15.50€
Temporarily Out Of Stock
Large switch MOSFET HP 4.5-40V/16A, with protection before the reverse current, Pololu 2813
Push-button module as an alternative to mechanical buttons. The switch is bistable, one press switches on the power supply, and another press switches it off. A..
14.80€
Temporarily Out Of Stock
DRV8434 stepper motor driver 48V/2A - Pololu 3762
Stepper motor driver module based on the DRV8434 system from Texas Instruments. It offers a wide selection of step resolutions - from full step to 1/256 step a..
14.80€
Temporarily Out Of Stock
MP6500 Stepper Motor Driver Carrier, Digital Current Control (Header Pins Soldered), 2A, Pololu 2969
Stepper motor controller based on MP6500 system. Powered from 4.5 V to 35 V, with a maximum current consumption of 2 A per coil. Maximum resolution: 1/8th step...
14.80€
Temporarily Out Of Stock
DC Motor Dagu DG01D-L with 48:1 Gear 4.5V - double sided shaft - 2 pcs
Plastic motor with 48:1 gearbox. Dual shaft turns at up to approx. 140 rpm, torque is 0.8 kg/cm (0.078 Nm). Powered by 4.5 V, it draws an average of 190 mA of c..
14.50€
Temporarily Out Of Stock
Step-Up Voltage Regulator U3V40F9 - 9V 3.5A - Pololu 4015
Pololu brand step-up converter with an output voltage of 9 V and a capacity of 3.5 A. The supply voltage ranges from 1.3 V to 9 V (the starting voltage is 2.7 V..
14.30€
Temporarily Out Of Stock
L3GD20H 3-axis, digital I2C SPI gyroscope, Pololu 2129
The module is equipped with gyroscope L3GD20H which is used to measure the angular velocity in three axes X, Y, Z. It has the possibility to choose the measurin..
14.20€
Temporarily Out Of Stock
DRV8835 dual, 2-channel motor driver 11V/1.2A, Shield for Arduino, Pololu 2511
The module based on the DRV8835 allows you to control motors with supply voltages up to 11 V and continuous current consumption up to 1.2 A. The controller can ..
13.90€
Temporarily Out Of Stock
Set of magnetic encoders for micro motors, Top-Entry connector, 2.7-18V, x2, Pololu 4760
A set of two magnetic, square-tube encoders for metal micromotors. The encoder uses a magnetic disk and a Hall effect to obtain 12 pulses per revolution. The se..
13.80€
Temporarily Out Of Stock
Set of magnetic encoders for Pololu micro motors (compatible with HPCB) 2.7-18V, x2, Pololu 3081
A pair of optical quadrature sensors, designed for installation in micro motors from Pololu from the micro-series with the bilateral shaft. The set consists of ..
13.50€
Temporarily Out Of Stock
S8V9F6 - step-up/step-down converter - 6V 1.5A - Pololu 4966
The S8V9F6 converter is an effective step-up / step-down device, providing an adjustable output voltage of 6 V with an input voltage range of 1.4 V to 16V. It ..
11.50€
Temporarily Out Of Stock
MP6500 Stepper Motor Driver Carrier, Digital Current Control, 2A, Pololu 2968
Stepper motor controller based on MP6500 system. Powered from 4.5 V to 35 V, with a maximum current consumption of 2 A per coil. Maximum resolution: 1/8th step...
12.60€
Temporarily Out Of Stock
38kHz IR Proximity Sensor, Fixed Gain, High Brightness, Pololu 2578
Proximity sensor, operating in the infrared range. It has a permanent amplification. This version of high brightness consumes around 16 mA when powered at 5 V. ..
12.40€
Temporarily Out Of Stock
Step-Down Voltage Regulator D24V3F12, 12V 0.3A, Pololu 2100
A step-down converter used to supply systems operating at 12 V. The system is designed for a wide range of input voltages from 3.8 V to 42 V (the minimum value ..
11.60€
Temporarily Out Of Stock
Zumo 32U4 - Blade for minisumo robot - Pololu 3121
A plow designed for Pololu Zumo 32u4 OLED minisumo robot. The element was made of metal. It also comes with a plastic holder for IR LEDs...
10.90€
Temporarily Out Of Stock
Showing 241 to 260 of 272 (14 Pages)