NANO V3.0 16MHz USB - ATmega328P - FTDI232 - Clone - compatible with Arduino

• A faithfully reproduced maple ensures operation and reliability.
• NANO has an FTDI 232 programmer thanks to which the module is ready for operation immediately after connecting to the computer
• Thanks to the convenient mini USB connector, it is easy to connect this module to a computer and program it. Thanks to its small size, it is suitable for smaller projects.
• The Atmega328p microcontroller is used in Arduino.
• Nano has a voltage stabilizer so we can power the module with a voltage higher than 5V.

Product features

• The Nano microcontroller, like the Pro, is based on the popular Uno module
• It has an Atmega328p microcontroller.
• The board has a MINI USB connector with an FTDI programmer
• The board contains an ATmega328p processor with
  • 32kB Flash memory
  • 1kB SRAM memory
  • 1kB EEPROM memory
  • It is clocked with a clock signal with a frequency of 16 MHz.
• The board has pins - outputs/inputs
  • 14 digital pins - can be used as input or output. The pins operate in the TTL5V standard. The efficiency of each of them reaches 40mA, and they also have built-in pull-up resistors. Some of the pins have additional functions (UART, INT, PWM, SPI, LED).
    • including 6 PWM channels, e.g. for controlling servos/motors, e.g. SG-90
  • 7 analog inputs, each of which allows measurement with 10 bit resolution. Some of the pins have additional functions (I²C, AREF, Reset) and can be used as ordinary additional digital pins.
• Arduino Nano can be powered
  • via a mini-USB cable
  • unstabilized voltage of 7-12V supplied to the VIN pin or from a stabilized voltage source of 5V (5V).
  • The system automatically selects the power source with the highest voltage.
  • The FTDI232 chip is a hassle-free on-chip programmer
• The system has a communication system with the computer through:
  • UART interface - connected to pins 0 (RX) and 1 (TX).
  • USB-FTDI
  • Additionally, I²C (TWI) and SPI interfaces are supported
• Works with voltages of 5 V.
• Switch for manual reset
• LED diodes to control the operation of the system
• The connectors arranged on the board allow you to plug the board directly into the breadboard.
• This version has soldered connector pins
• Programming is done using the Arduino IDE, a free software that is extremely beginner-friendly. - IDE program - http://www.arduino.cc/en/Main/Software
• The microcontroller on the board has a pre-installed bootloader that allows you to upload software without using additional hardware.
  • As standard, the BLINK LED 13 program and bootloader are loaded into the module - description http://majsterkowo.pl/od-go-zaczac-zabawę-z-arduino/
• Additionally, it is possible to program the processor via ICSP.

Technical data

• Supply voltage: 5V
• Microcontroller: ATmega328 - 16 MHz
• Ports - I/O pins: 14
• Number of analog inputs: 7
• Number of PWM outputs: 6
• Serial interfaces: UART, SPI, I2C
• External interrupts
• Protection against excessive current flow
• The module is made of 0.8 mm thick laminate
• Weight less than 5 g.
• pin spacing 2.54mm (can be mounted in breadboards)
• Dimensions: 45x19 mm
• 32kB flash memory
• 1kB EEPROM
• 1kB SRAM
• 2 8-bit timers/counters
• 1 timer/counter 16 bit

Notes on construction and connection

• Power supply
  • If the supply voltage is higher than 5 V, connect it to the VIN pin, which is connected to the stabilizer.
  • VCC is connected directly to the microcontroller pins, connecting a voltage higher than 5V may permanently damage the system.
• Inputs/outputs
  • Arduino Pro has 14 digital input/output (I/O) pins.
  • Each pin allows a maximum current of 40 mA, which allows direct connection of LEDs with resistors and control of other integrated circuits.
  • In addition to standard I/O, some pins also have special functions.
• programming
  • Creating and uploading software is possible in a free environment provided by the manufacturer.
  • The ISCP connector allows you to connect an external AVR programmer. A detailed description can be found in the documentation and tutorial.
  • Via the ISCP connector, you can use the ASP USB programmer for programming.
  • Arduino can also be programmed using external UART converters.

Important and useful pages and descriptions

• Arduino Pro Mini Home Page - http://www.arduino.cc/en/Main/arduinoBoardNano
• IDE program - http://www.arduino.cc/en/Main/Software
• Errors in the pinouts of the Nano V3.0 board - http://microcontrollers.cba.pl/?p=6
• USB chip driver - http://www.driverscape.com/download/usb-serial-ch341

Pinout description

Example use in a project

Included

• NANO V3.0 16MHz USB - ATmega328P - FTDI232 - 1 pc.

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

Paid orders of more than 150€ are shipped for free to Latvia and Estonia.

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.

Product availability status:

Vilnius Store In Stock - the product is at the store, Vytenio str. 20 in Vilnius and can be picked up / purchased at same day;

Kaunas Store In Stock - the product is at the store, Pramonės pr. 4D in Kaunas and can be picked up / purchased the same day;

Central Warehouse In Stock - In stock, product will be shipped in a short time 1-2 work days;

1-2 work days - product will be shipped in a short time - 1-2 business days;

2-3 work days – we don’t have selected product in local warehouse. Shipping time is only 2-3 work days;

3-5 work days – we don’t have selected product in local warehouse. Shipping time is between 3-5 work days;

3-7 work days – we don’t have selected product in local warehouse. Shipping time is between 3-7 work days;

Out of Stock – selected product is sold out at the moment, but you can apply for automatic alert by email when product will be in stock.