NANO V3.0 16MHz USB - ATmega328P - CH340 - Clone - Compatible with Arduino 1.8

Universal mini NANO module with ATmega328P microcontroller and mini USB connector.

Can be used in many microprocessor projects.

The system is compatible with Arduino project.

• Precision-reclaimed maple ensures performance and reliability.
• NANO has a CH340 programmer that requires an additional driver, which you can find below.
• Thanks to the convenient mini USB connection, this module is easy to connect to a computer and program it. Its small size makes it suitable for smaller projects.
• Atmega328 microcontroller is used in Arduino.
• Nano has a voltage stabilizer, so we can supply the module with a voltage higher than 5V.

Compatible with our proto display board.

ATTENTION!!!

The microcontrollers have a bootloader for Arduino IDE versions 1.8 and up. If you have an older version of the ARDUINO IDE, you will not be able to load the program onto the board. We can load the old bootloader using the USBasp programmer. If you don't have a programmer, we can upload the old bootloader as soon as you include this information in the order notes.

Features:

• The Nano microcontroller, like the Pro, is based on the popular Uno module
• Has an Atmega328 microcontroller.
• The board has a MINI USB connector with a CH340 chip
• The board has an ATmega328 processor with
• - 32kB Flash memory
• - 1kB SRAM memory
• - 1kB EEPROM memory
• - It is monitored by a clock signal with a frequency of 16 MHz.
• The board has pins - outputs/inputs
• - 14 digital pins - can be used as input or output. The pins work according to the TTL5V standard. Each of them has an efficiency of 40mA and also has built-in pull-up resistors. Some pins have additional functions (UART, INT, PWM, SPI, LED).
• including 6 PWM channels such as for servo/motor control such as Micro servo SG90
• - 7 analog inputs, each of which allows measurement with 10-bit resolution. Some pins have additional functions (I²C, AREF, Reset) and can be used as normal additional digital pins.
• Arduino Nano can be powered
• - via mini USB cable
• - an unstabilized voltage of 7-12 V is supplied to the VIN pin or from a stabilized voltage source of 5 V (5 V).
• - The system automatically selects the highest voltage power source.
• - CH340 system that ensures communication with the computer.
• The system has a system of communication with the computer through:
• - UART interface - connected to pins 0 (RX) and 1 (TX).
• - USB - CH340 chip
• - In addition, I²C (TWI) and SPI interfaces are supported
• Works with 5V voltage.
• - Manual reset switch
• - LEDs to control system operation
• - The connectors on the board allow you to connect the board directly to the breadboard.
• This version has soldered connector pins
• Programming is done using the Arduino IDE, a free software that is particularly user-friendly for beginners. - IDE software - http://www.arduino.cc/en/Main/Software
• The on-board microcontroller has a pre-installed bootloader that allows software to be loaded without the need for additional hardware.
• - By default, the BLINK LED 13 program and bootloader are loaded into the module
• In addition, the processor can be programmed via ICSP.

• Supply voltage: 5V
• Microcontroller: ATmega328 - 16 MHz
• Ports - I/O Pins: 14
• Number of analog inputs: 7
• Number of PWM outputs: 6
• Serial interfaces: UART, SPI, I2C
• External interrupts
• Protection against excessive current flow
• The module is made of 0.8 mm thick laminate
• Weight less than 5 g.
• Distance between pins 2.54 mm (can be mounted on breadboards)
• Dimensions: 45x19 mm
• 32kB flash memory
• 1kB EEPROM
• 1kB SRAM
• 2 8-bit timers/counters
• 1 timer/counter 16 bit

Notes on construction and connection

• Feeding
• - If the supply voltage is higher than 5V, connect it to the VIN pin, which is connected to the stabilizer.
• - VCC is directly connected to the microcontroller pins, applying more than 5V can permanently damage the system.
• Inputs/outputs
• - The Arduino Pro has 14 digital input/output (I/O) pins.
• - Each pin allows a maximum current of 40 mA, which allows direct connection of LEDs with resistors and control of other integrated circuits.
• - In addition to standard I/O, some contacts have special functions.
• Programming
• - Developing and uploading software is possible in a free environment provided by the manufacturer.
• - The ISCP connector allows you to connect an external AVR programmer. You can find a detailed description in the documentation and the tutorial.
• - You can use ASP USB programmer for programming via ISCP connector.
• - Arduino can also be programmed using external UART converters.

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 70€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.

Paid orders of more than 100€ are shipped for free to Latvia and Estonia.

Product availability status:

Vilnius Store In Stock - the product is at the store, Vytenio str. 20 in Vilnius and can be picked up / purchased at same day;

Kaunas Store In Stock - the product is at the store, Pramonės pr. 4D in Kaunas and can be picked up / purchased the same day;

Central Warehouse In Stock - In stock, product will be shipped in a short time 1-2 work days;

1-2 work days - product will be shipped in a short time - 1-2 business days;

2-3 work days – we don’t have selected product in local warehouse. Shipping time is only 2-3 work days;

3-5 work days – we don’t have selected product in local warehouse. Shipping time is between 3-5 work days;

3-7 work days – we don’t have selected product in local warehouse. Shipping time is between 3-7 work days;

Out of Stock – selected product is sold out at the moment, but you can apply for automatic alert by email when product will be in stock.