Magigoo Orginal 120ml - The 3D printing adhesive

Brand: Magigoo
Product Code: PRM-7148
Availability: 4-7 business days
Planuojama gavimo data po užsakymo: 2025-05-09
47.70€
Ex Tax: 39.42€

Qty

Do you have problems with warping when 3D printing? Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of the first non-sticky layer (warping). This is the most common problem in 3D printing for manufacturing with FFF/FDM technology.
All you need for sure is the adhesion of 3D prints Magigoo is an easy-to-use 3D printing adhesive designed to address the first layer not sticking problem. Magigoo ensures strong adhesion to the hot plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick. In addition, Magigoo helps to prevent warping. Regardless of whether you are a hobbyist or professional - it is extremely rewarding to have a 30-hour print complete without any warping and have it released easily once cooled.
Important note: the applicator has an active spring valve, which activates when the applicator is pressed against the build plate. Please do not press the bottle as a ketchup bottle, otherwise, the applicator may pop off. The bottle may be slightly squeezed, only when the nib is pressed against the bed and it may be necessary only if a bigger flow is required. The bottle must not be squeezed when the cap is off any other time as it may result in glue popping out of the bottle.

Main features:
  • Easy application: applying Magigoo is as easy as child's play. Shake, press, and apply. Spread on an active printing area only. No need to cover the whole surface
  • Easy-release: Magigoo adhesive properties are designed to release the 3D print once the build plate has cooled
  • Easy-clean: Magigoo is easily cleaned with water
  • Long-lasting: Magigoo last for 100+ average prints
  • Odorless and safe: Magigoo is safe to use - be it in a closed room or educational workshop with kids