M1U256 - single-channel motor controller 48V/2.2A - UART interface - Pololu 5063

Brand: Pololu
Product Code: AN-22773
Availability: 4-6 business days
Planned delivery date after ordering: 2025-05-02
22.20€
Ex Tax: 18.35€

Qty

A driver based on the M1U256 system that allows you to control one DC motor. It uses the UART TTL interface for communication. The module can work with motors supplied with a voltage of 4.5 V to 48 V. The maximum output current per motor is 2.2 A. The controller also withstands current spikes of up to 6.4 A for a few seconds. The user can connect several controllers to the same TTL serial bus and extend the project with additional motors. The set includes a goldpin strip 1x12 with a raster of 2.54 mm for self-soldering.

Main features:
  • Control of one DC motor
  • UART interface
  • Ability to connect multiple controllers to one serial bus and extend the project with additional motors
  • Protection against reverse voltage on the motor supply up to 40 V
  • Optional Cyclic Redundancy Check (CRC)
  • Configurable motion parameters:
    • maximum acceleration/deceleration
    • initial speed
    • direction change delay
  • Eight PWM frequency options from 1kHz to 80kHz
  • Protection in case of connection loss
  • Configurable automatic error response
  • Engine supply voltage measurement (VIN)
  • Informative LEDs
Specification:
  • Number of channels: 1
  • Supply voltage: from 4.5 V to 48 V
  • Operating voltage of the logic part: from 3.0 V to 5.5 V
  • Continuous current: 2.2 A
  • Maximum instantaneous current: 6.4 A
  • PWM frequency: 1 kHz to 80 kHz
  • Dimensions: 15.24 x 15.24 mm
  • Weight: 1.2 g
Set includes:
  • M1U256 - single-channel DC motor driver 48V/2.2A - UART interface - Pololu 5063
  • Goldpin strip 1x12 raster 2.54 mm