LSM6DSO, 3-axis accelerometer and I2C/SPI gyroscope, SparkFun SEN-18020

Brand: Sparkfun
Product Code: AN-19708
Availability: 4-6 business days
Planned delivery date after ordering: 2025-04-15
20.80€
Ex Tax: 17.19€

Qty

PCB with 6DoF LSM6DSO chip containing accelerometer and gyroscope along with 9 kB FIFO buffer and embedded processing interrupt functions. The device can detect shock, roll, motion, touch, count steps, and read the temperature. The LSM6DSO is capable of reading accelerometer and gyroscope data at speeds up to 6.66 kHz. The module is equipped with an I2C and SPI communication interface. Built-in two Qwiic connectors allow easy connection to the main module via the I2C interface. The module operates at 3.3 V

Main features:
  • Accelerometer data reading at 6.66 kilosamples/s
  • Reads gyroscope data at 6.66 kilosamples/s
  • Draws 0.55 mA for modes up to 6.66 kilosamples/s
  • Temperature readout
  • Buffer up to 9 kB of data between readings (built-in FIFO)
  • Step counter (pedometer)
  • Shock, tilt, motion, tap, double-tap detection
  • Host other sensors to its FIFO
  • Triggering of interrupt pins by built-in functions or by low capacity/filled FIFO warning
Specification:
  • 2x Qwiic connector
  • I2C address: 0x6B (default), 0x6A
  • Accelerometer reading range: ± 2 / ± 4 / ± 8 / ± 16 g full scale
  • Gyroscope reading range: ± 125 / ± 250 / ± 500 / ± 1000 / ± 2000 dps full scale
  • Built-in temperature sensor: 16-bit
  • Operating voltage: 1.71 V to 3.6 V (3.3 V for Qwiic)
  • Current consumption at 1.8 V:
    • 0.55 mA in combo high-performance mode
    • 0.265 mA in low power combo mode
  • "Always on" with low current consumption for accelerometer and gyroscope
  • I2C / SPI interface
  • Smart FIFO up to 9 kB
  • Operating temperature: from -40 °C to 85 °C
  • Board dimensions: 25.4 x 25.4 mm