Instant gel glue Technicqll C-297 2g

Brand: Blow
Product Code: 3386
Availability: 4-6 business days
Planuojama gavimo data po užsakymo: 2025-01-03
2.50€
Ex Tax: 2.07€

Qty

Instant gel glue Technicqll C-297 2g

One-component, colorless gel adhesive based on ethyl cyanoacrylate, with the highest technical adhesion parameters, cross-links under the influence of moisture. Due to its high viscosity and thixotropic properties, it does not run off vertical surfaces and does not absorb porous surfaces. Bonds metal, rubber, porcelain and many plastics very strongly in seconds.

Parameters:

  • Viscosity: gel
  • Shear strength: 3.5 MPa
  • max filling gap: 0.25mm
  • Temperature range: -550C to 800C
  • Shelf life: 12 months

Characteristics:

  • universality
  • high gluing speed
  • single component
  • high viscosity

Purpose:

For gluing: metal, rubber, wood, ceramics, cement, hard plastic, glass, leather, plywood, aluminum, etc. (except PE, PP and Teflon). Bonds hard and flexible materials and on vertical surfaces. Metal combinations "metal + rubber, plastic + rubber, paper + plywood + glass, etc." are also used. for gluing. And sealing rings.

Advantages:

  • bonds all materials except polyolefins, PTFE, silicone rubber
  • short repair time
  • easy to use
  • does not flow, does not drip, does not absorb glued surfaces

Usage:

1. When opening the tube for the first time, pierce the membrane with the top of the cap.
2. The base must be clean and degreased. Degrease the surface (P-102 or P-959 Technical Degreaser).
3. Apply glue only to one of the joined surfaces.
4. Do not add glue in large quantities (the less glue, the stronger the bond).
5. After applying the glue, join and press the surfaces, holding them for 10 to 90 seconds, depending on the material to be bonded.
6. Carefully clean the applicator from the glue residue, clean the tip and close the tube.