Ethernet 10/100 Mb/s - UART Converter for Raspberry Pi Pico - Waveshare 20410

Brand: Waveshare
Product Code: AN-21722
Availability: 4-6 business days
Planned delivery date after ordering: 2025-04-25
13.52€ 17.40€
Ex Tax: 11.17€

Qty

Ethernet to UART converter for Raspberry Pi Pico, enabling network communication via UART. The device supports four operating modes: TCP Client, TCP Server, UDP Client, UDP Server. It has built-in Ethernet MAC and PHY layers. The soldered female goldpin strip allows you to easily connect the Raspberry Pi Pico via the GPIO pins.

Main features:
  • The device has soldered goldpin strips, adapted for mounting on a Raspberry Pi Pico
  • Jumpers for pin configuration
  • Built-in Ethernet MAC and PHY layers
  • Bidirectional data transmission between UART and Ethernet
  • Ethernet 10/100 Mb/s, full-duplex / half-duplex, auto-negotiation of the Ethernet interface, compatible with the 802.3 standard
  • Auto-MDI / MDIX automatically detects and changes wire type
  • Supports DHCP by automatically accessing IP and DNS domains
  • Configuration of network parameters such as chip operating mode, port, IP, by host computer software or UART command
  • UART communication in full-duplex or half-duplex mode supports RS485 RX / TX automatic switch (external RS485 controller required)
  • KEEPALIVE mechanism support
Specification:
  • Developer: Waveshare
  • Manufacturer part number: 20410
  • Compatible with Raspberry Pi Pico
  • Working voltage: 3.3 V / 5 V
  • Working current: 140 mA
  • Working mode: TCP / UDP
  • Transmission speed: from 300 bps to 921.6 Kbps
  • UART TTL: compatible with 3.3 V / 5 V
  • Operating temperature: -40 °C to 85 °C
  • Storage temperature: -55 °C to 125 °C
  • Dimensions: 75.54 x 21 mm