ESP-32 WiFi with Bluetooth 2.4 GHz Dual Mode module - ESP-WROOM-32 - Arduino

Product Code: ABC-12433
Availability: Vilnius Store Out of Stock
Kaunas Store Out of Stock
Central Warehouse In Stock
16.60€
Ex Tax: 13.72€

Qty

The board is equipped with the ESP-WROOM-32 module . This module has golpin pins with a pitch of 2.54mm. The ESP system is dedicated to communication in the Wi-Fi 2.4GHz network and in the Bluetooth BLE 2.4 GHz Dual Mode standard. Its great advantage is compatibility with popular interfaces such as UART, SPI or I2C. Thanks to the converter, the module is connected directly to the USB port using a micro USB cable, which makes programming much easier and faster. 

Specification:

  • ESP-WROOM-32 system
DC power supply:
  • Working voltage: 2.3 V to 3.6 V
  • The operating voltage of the logic of I / O ports: 0 - 3.6V
  • Supply voltage VIN: 4.8 - 12V
  • Maximum current consumption: 800mA
CPU:
  • Xtensa® dual-core 32-bit
  • housing: QFN48-pin (6 mm × 6 mm)
  • 448 KB ROM
  • 520 KB of SRAM
  • 16 KB SRAM on RTC
  • Support up to 16MB external flash memory via SPI
  • Processor clock speed up to: 240 MHz
  • Hall sensor
  • Touch sensor
  • GPIO: 30
  • ADC: 18 12-bit channels
  • DAC: 2 x
  • Interfaces: UART / SDIO / SPI / I2C / I2S / CAN2.0 / IR (TX / RX) / Motor PWM
WiFi:
  • Standard: 802.11b / g / n 2.4GHz
  • Wi-Fi Standard : FCC / CE / TELEC / KCC
  • Wi-Fi Security: WEP, WPA / WPA2, PSK / Enterprise, AES / SHA2 / Elliptical Curve Cryptography / RSA-4096
  • Transmission speed: 150Mbps
  • Antenna type: diversity
Bluetooth:
  • Compatibility: BT v4.2 BR / EDR and BLE
  • Transmission power: + 12dBm
  • Supported audio codecs: CVSD, SBC
  • Multi-connections: BT, BLE
  • Connector: microUSB
  • 2 buttons: Enable and Boot
  • Goldpin connectors, 2.54 mm pitch: to facilitate plugging into the breadboard
  • Arduino IDE Compatibility: Arduino IDE 1.6+
  • Dimensions: 49 x 26 x 13 mm (with connectors)