Educational Electronics Kit - Smart Circuits with ATmega328P Microcontroller

Brand: Anodas electronics
Product Code: AN0315
Availability: Vilnius Store In Stock
Kaunas Store In Stock
Central Warehouse In Stock
25.50€
Ex Tax: 21.07€

Qty

This kit is designed to introduce the principles of electronics and programming. Thanks to the components in this set, you can create 5 projects from the book Smart Chains with Arduino. You can download this book for free in PDF format.

In the set:

  • 1x UNO R3 microcontroller compatible
  • 20x F-F breadboard cables
  • 1x USB cables
  • 1x Midi Breadboard
  • 5x 3 color LED diodes (random)
  • 10x Resistor 220ohm
  • 10x Resistor 1K
  • 10x Resistor 10K
  • 10x Resistor 100K
  • 2x Photoresistor 5516
  • 6x Buttons (with random color caps)
  • 1x 9V battery connector
  • 1x 40 pin contact strip

Drivers (Win7/Win8.1/Win10): Download

Specifications:

  • Supply voltage: from 7V to 12V
  • Fully compatible with Arduino Uno Rev3
  • Microcontroller: ATmega328 - operating voltage 5V
  • Maximum clock frequency: 16 MHz
  • SRAM memory: 2 kB
  • Flash memory: 32 kB (5 kB reserved for bootloader)
  • EEPROM memory: 1 kB
  • 14 IN-OUT inputs, including 6 PWM
  • single pin current efficiency 40mA
  • Number of analog inputs: 6 (A/D converter channels)
  • Serial interfaces: UART, SPI, I2C
  • External interrupts
  • Connection: USB socket
  • Soldered ISP connector
  • Panel dimensions: 75x54x15mm
  • Distance between pins 2.54mm (can be mounted on contact plates)
  • USB cable included
  • The module is fully compatible with Arduino Uno R3. (meaning it can be programmed via the Arduino IDE using the available libraries.)
  • The module has:
  • - ATmega328 microcontroller - the system works with a clock signal with a frequency of 16MHz
  • - 14 digital inputs/outputs,
  • - 6 PWM channels - e.g. to control servos/motors, e.g
  • - 6 analog inputs
  • - popular communication interfaces
  • - USB connection CH340
  • - DC power outlet
  • - RESET button
  • - pins for connecting the AVR programmer.
  • To run the DFRduino, connect the system to the computer with a USB cable and select the Arduino Uno board in the Arduino IDE environment.
  • the module is mostly compatible with shields for Duemilanowe and Diecimila
  • By default, the BLINK LED 13 program and bootloader are loaded into the module