Easy Servo CS-D1008E servo stepper controller - 8A Leadshine

The Leadshine CS-D1008E hybrid motor controller is a closed-loop servo-stepper drive designed to solve the step loss problem of open-loop stepper motor control systems. By using this solution, we increase the reliability of the system with a minimal increase in costs. The controller uses the advanced Leadshine control algorithm, which is based on decades of manufacturer's experience in stepper and servomechanism control. The CS-D1008E drive is reliable and affordable; works perfectly in many industrial applications, wherever positioning precision is required…

The CS-D1008E controller has been designed so that most operating parameters can be set without the need to connect to a computer.

The CS-D1008E driver can power 2-phase NEMA23, NEMA24 and NEMA34 stepper motors with incremental encoders. Compared to traditional open-loop stepping systems, the CS-D1008E's closed-loop stepping system eliminates lost steps by correcting position errors in real time. Thanks to this, the motor does not have to be significantly oversized, as is the case with traditional stepper motors operating without an encoder (a larger motor was a defense against losing steps, which unfortunately made the investment more expensive). Additionally, the controller controls the powered hybrid engine with reduced heating, lower noise level, and lower vibrations, which translates into the quality and smooth operation of the machine;

Features offered by the CS-D1008E controller
- Work without losing steps of the stepper motor thanks to the use of an encoder and an advanced control algorithm
- Easy tuning and configuration - dynamic engine operation without overshoot
- Greater efficiency, especially at low speeds
- Soft start of the engine - without the characteristic step-like impact after turning on the power
- Supply voltage 18-80VAC or 24-110VDC, output current max. 8.0A
- Maximum input frequency 500 KHz
- Configurable division - 15 microstep ranges 800-51,200 using DIP switches or 200-51,200 using software (increase by 200)
- Gain settings and tuning via rotary switch S1 (no need for software tuning, although it is still possible)
- Optically isolated inputs - control voltage can be selected with a built-in switch - 5V or 24V
- Setting the direction of motor rotation using the SW5 switch
- Setting closed or open loop control with SW6
- Setting the control method - step/direction or CW/CCW using SW7
- Determining the function of the universal output - position reach or brake output - using SW8
- Alarm output
- The controller has protections: overvoltage, overcurrent, position after error, etc

Application
The CS-D1008E closed-loop servo drive can be used in many applications. It is particularly suitable for low and medium speed applications such as CNC milling machines, CNC milling machines, CNC laser cutting machines, CNC plasma, laboratory automation instruments, plotters, electronics production equipment, packaging machines, etc.

Engine selection
The CS-D1008E controller is designed to power 2-phase NEMA 23/24/34 stepper motors with incremental encoders below 10,000 pulses/revolution. Leadshine offers many high-performance stepper motors compatible with the CS-D1008E, which can be found in our store. Thanks to easy tuning, the CS-D1008E controller can also work with hybrid motors (equipped with an encoder) from other manufacturers.

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

Paid orders of more than 150€ are shipped for free to Latvia and Estonia.

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.

Product availability status:

Vilnius Store In Stock - the product is at the store, Vytenio str. 20 in Vilnius and can be picked up / purchased at same day;

Kaunas Store In Stock - the product is at the store, Pramonės pr. 4D in Kaunas and can be picked up / purchased the same day;

Central Warehouse In Stock - In stock, product will be shipped in a short time 1-2 work days;

1-2 work days - product will be shipped in a short time - 1-2 business days;

2-3 work days – we don’t have selected product in local warehouse. Shipping time is only 2-3 work days;

3-5 work days – we don’t have selected product in local warehouse. Shipping time is between 3-5 work days;

3-7 work days – we don’t have selected product in local warehouse. Shipping time is between 3-7 work days;

Out of Stock – selected product is sold out at the moment, but you can apply for automatic alert by email when product will be in stock.