E3D RapidChange Revo Hemera XS - 1.75mm, 12V Fully Loaded Nozzle Kit

Brand: E3D
Product Code: PRM-9237
Availability: 4-7 business days
Planuojama gavimo data po užsakymo: 2025-05-12
284.40€
Ex Tax: 235.04€

Qty

Revo Hemera XS is 92 g lighter and 11 mm shorter than classic Hemera. A custom stepper motor means it can move faster on your 3D printer’s motion system with less inertia than classic Hemera, reducing print artifacts such as ghosting. Its compact size also means it occupies less space inside your 3D printer’s build volume - useful for smaller 3D printers.
Enjoy the excellent performance with all 3D printing materials, particularly challenging materials like flexibles and abrasives. Enhanced extrusion and retraction control mean you can 3D print soft flexibles with a shore hardness as low as 75 A.
The heatsink geometry for Revo Hemera XS accepts Revo Nozzles as well as V6 nozzles with a Hemera HeatBreak (sold separately).
Revo Hemera XS has all the extrusion force you need to drive the entire E3D ecosystem, including high-flow HotEnds like SuperVolcano and high-flow Revo Nozzles.
In the event of a jam, the filament drive mechanism for Revo Hemera XS will stall instead of stripping the filament, making it easier to recover and get 3D printing again.
A variety of Revo Nozzles enhance the capabilities of your 3D printer without difficult nozzle-changing processes. Every Revo Nozzle can be changed by hand. No tools, no hot tightening.
Power reduces to the Revo HeaterCore as it gets hotter, thanks to built-in PTC behavior. This gives you greater protection against hazards caused by thermal runaways.
Our custom mounting system means a range of accessories can be mounted on this extrusion system, such as bed leveling probes, and expansion boards.
Everything you need to start 3D printing is in the box, including Revo Nozzles and a Revo HeaterCore.

Specification:

  • Max. temp: 300 °C
  • Voltage 12 V or 24 V
  • Power: 40 W
  • Filament diameter: 1.75 mm
  • Nozzle type: RapidChange Revo
  • Mounting system: T-slot
  • Step angle: 1.8°
  • Recommended current: 1.40 A Peak (~0.99 A RMS)
  • Mass: 256.25 g

Set includes:

  • 1 x Hemera XS Assembly
  • 1 x Hemera fixings kit
  • 1 x 40 x 40 x 10 mm 12 V or 24 V Fan
  • 1 x Revo HeaterCore 12 V or 24 V
  • 1 x Revo HeaterCore spring
  • 1 x Extension cable kit
  • 1 x 0.25, 0.40, 0.60 & 0.80 Brass Revo Nozzles