Your shopping cart is empty!
Raspberry Pi 5 and kitsRaspberry Pi 4 and kitsRaspberry Pi 3B+ and kitsRaspberry Pi 3B and kitsRaspberry Pi Zero and accessoriesRaspberry Pi PicoRaspberry Pi CMScreens for Raspberry PiRaspberry Pi Camera modulesCases for Raspberry PiHAT extension for Raspberry PiRaspberry Pi 3/2/+ accessoriesPower Supply for Raspberry PiRaspberry Pi memory cards with NOOBS
STM32 MicrocontrollersATmega microcontrollersTeensy - ARMAdafruit FeatherESP8266 / ESP32 WiFi ModulesM5Stack controller and accessories
Security camerasSonoff WiFi Smart SwitchShelly home automation WiFiTuya Smart LifeBlitzWolfGate Automation SystemsBleBox WiFi Smart SwitchHousehold FansSwitchBotLED strip controllersLED floodlightsHumidifiersSmart LED lightningSmart devices for petsHealth and personal care products
Sensors - modulesWireless Communication ModulesRelay modulesLCD/OLED/TFT DisplaysMotor controllersProgrammers and convertersConnectorsSwitchesVoltage RegulatorsBasic Starter KitPrototypingAudio Amplifiers / Speakers / OtherLED DiodesPassive electronic componentsActive electronic componentsCoolingElectromagnets and solenoidsWearable electronics and materials
Hybrid Servo MotorsServo motors and accessoriesDC motorsStepper motorsPlanetary GearsSingle-phase and Three-phase Electric MotorsVibration MotorsBrushless Motors and ControllersElectric Linear Actuators and CylinderWorm Gears and AccessoriesWater pumpsStepper Motor MountsMotor Controller CablesWheels and mounting parts for motors
Rechargeable batteryAlkaline BatteriesPower Supply AccessoriesBattery Chargers Ni-Mh / Ni-Cd / Li-Ion / Li-Pol / Li-FeLi-Ion battery charging and balancing boardsAC/DC Mains powers supply adapterAdjustable Lab Power SuppliesPower Supplies AC/DCUninteruptable power supply UPSInverters DC/ACLaptop adapterBatteries for power toolsEV Car accessoriesCharger for Electric Bikes
Soldering toolsBattery Welding Machines and accessoriesMeasuring equipmentChemicalsTweezersElectric toolsScrewdrivers and wrenchesHot Glue GunPlier and cutting nipperInsulation removal and crimping toolKnives and scissorsElectric engraver toolsMagnifying glassesInsulating materialsFlashlightPlastic enclosureStorage boxes and OrganizersUltrasonic cleanersLabel printersAIRCELL Air Cushion
CNC machines and accessoriesAluminum Extrusion ProfilesLinear ActuatorBrackets and Other Accessories for Aluminium ProfilesLinear guides and garriagesRollers on supportsTrapezoidal Screws and NutsLinear Steel RodsLinear bearingsBearingsTiming BeltsTiming PulleyLinear Rod SupportSpindle motors, converters and mount bracketsScrews and NutsCable ChainsDrills and Cutters
AEON Laser Engraving Cutting MachineFiber Metal Marking LaserCO2 Galvo engraving-marking machineUV Marking machineFLUX Laser Engraving Cutting MachineXTOOL LASER AND BLADE CUTTING MACHINEDiode laser engraving laserLaser machine spare parts and accessoriesEngraving MaterialsLightBurn Software
3D Printers3D scanner3D Pens3D Printing filamentsSLA 3D Printing resin3D Printer maintenance and cleaning3D Printer parts
Educational kits for beginnersEducational kits for advancedSNAP CIRCUITS kitsAbilix Krypton roboticsRobobloq roboticsLEGO Education
USB cablesVideo cables and connectorsUSB HUBComputer network cablesNetwork equipmentAudio cables and connectorsConnection Cables, ExtendersData storages and their accesoriesKeyboard and MouseLaptop batteries
Phone holdersPower BankHeadphonesMobile phone chargersPhone casesSelfie stickSmart WatchesPhone batteriesPortable speakers
CreatBot PEEK-300
Ex Tax: 13,125.04€
The CreatBot PEEK-300 is a new industrial-grade 3D Printer that puts full focus on high-performance materials such as PEEK and PEI. The printer is designed for high reliability and economical 3D printing of high-performance functional materials.
The PEEK-300 has an impressive build space of 300x300x400 mm. To be able to print PEEK in this size is very good.
The PEEK-300 extruders include an intelligent cooling system. This ensures that the filament is feeding at the optimal temperature all the time. The height-adjustable nozzles allow you to align your two nozzles very quickly and easily. Perfect when you want to 3D print with support, varied materials, or just two colors. All CreatBots from 3D Prima comes with dual extruders as standard.
The cooling system is one of the most important components in a printer, and even more so in a printer that can reach high temperatures. PEEK-300 has a newly developed liquid cooling system that makes the water circulate within the hot end and keeps it at optimal temperature.
To aid the liquid cooling system the PEEK-300 also has an air pump cooling system. The function that sets this printer apart from others is that it takes cool air from the outside, rather than just use the hot air inside the printer.
If you should run out of filament during a 3D print, don't worry. The 3D printer will go into pause mode and let you change the filament - then you just hit resume, easy!
If you should have an unexpected power loss the PEEK-300 remembers the last known position, stores it, lowers and retracts the filament. When the power comes back on you can continue to 3D print.
The nozzles can operate in temperatures up to 500 °C. This means that you can use a wide range of different filaments, including PEEK.
The build-chamber on the PEEK-300 can be heated to 120 °C. Thanks to this function the printer can keep a constant temperature and means that you run a much lesser risk of cracks and warping. That is a problem that you often encounter with ABS for instance on printers without a heated build chamber.
The build platform on the PEEK-300 can reach 200 °C. This is essential if you want to print materials like PEEK, PEKK and similar materials.
With the PEEK-300, CreatBot has taken everything a step further when it comes to speed, precision and reliability. Resolution up to 0,04 mm and a print speed up to 120 mm/s (40-60 mm/s optimal speed). Combine this and a powerful direct-drive setup, and you have a printer that will perform at its best every time you use it.
On the CreatBot PEEK-300, you have a totally enclosed build space that prevents large 3D prints from being cracked or warped.
Main features:
The PEEK-300 has an impressive build space of 300x300x400 mm. To be able to print PEEK in this size is very good.
The PEEK-300 extruders include an intelligent cooling system. This ensures that the filament is feeding at the optimal temperature all the time. The height-adjustable nozzles allow you to align your two nozzles very quickly and easily. Perfect when you want to 3D print with support, varied materials, or just two colors. All CreatBots from 3D Prima comes with dual extruders as standard.
The cooling system is one of the most important components in a printer, and even more so in a printer that can reach high temperatures. PEEK-300 has a newly developed liquid cooling system that makes the water circulate within the hot end and keeps it at optimal temperature.
To aid the liquid cooling system the PEEK-300 also has an air pump cooling system. The function that sets this printer apart from others is that it takes cool air from the outside, rather than just use the hot air inside the printer.
If you should run out of filament during a 3D print, don't worry. The 3D printer will go into pause mode and let you change the filament - then you just hit resume, easy!
If you should have an unexpected power loss the PEEK-300 remembers the last known position, stores it, lowers and retracts the filament. When the power comes back on you can continue to 3D print.
The nozzles can operate in temperatures up to 500 °C. This means that you can use a wide range of different filaments, including PEEK.
The build-chamber on the PEEK-300 can be heated to 120 °C. Thanks to this function the printer can keep a constant temperature and means that you run a much lesser risk of cracks and warping. That is a problem that you often encounter with ABS for instance on printers without a heated build chamber.
The build platform on the PEEK-300 can reach 200 °C. This is essential if you want to print materials like PEEK, PEKK and similar materials.
With the PEEK-300, CreatBot has taken everything a step further when it comes to speed, precision and reliability. Resolution up to 0,04 mm and a print speed up to 120 mm/s (40-60 mm/s optimal speed). Combine this and a powerful direct-drive setup, and you have a printer that will perform at its best every time you use it.
On the CreatBot PEEK-300, you have a totally enclosed build space that prevents large 3D prints from being cracked or warped.
Main features:
- Large build volume of 300x300x400
- Dual extruder
- Resume print if power fails
- Pause print if filament runs out
- Prints up to 500 °C
- Heated build plate 200 °C
- Heated build chamber 120 °C
- Water-cooled system
- Fully enclosed chamber
- Automatic and manual bed leveling
- 4,3" touch screen
- HEPA air filtration
- Usable Nozzle Type: MK8
- Usable Filament Diameter: 1.75 mm
- Max Nozzle Temperature: 500 ºC
- Open Filament System: Yes
- Extruder Type: direct drive
- Recommended Printing Speed Max: 150 mm/s (depends on material)
- Build Area: 300 mm x 300 mm x 400 mm
- Dual Build Area: 300 mm x 300 mm x 400 mm
- Build Plate Temp Max: 200 ºC
- Build Plate Surface: carbon fiber sheet, removable
- Build Plate Material: Aluminum plate
- Build Plate Attachment: fixed
- Build Plate Leveling System: BL-Touch
- Build Chamber During Process: Open or Closed
- Build Chamber Heated: Yes, max. 120 °C
- Filament Chamber Closed: Yes
- Extruder Number Of: 2
- Extruder Construction Type Dual: Dual-head with electronic lifting system
- Total Mass Overall Dimensions: 650 mm x 600 mm x 750 mm
- Total Weight: 100 kg
- Ambient Operating Temperature: 15 °C - 32 °C
- Max Power Consumption: 3000 W
- Voltage: AC: 230 V (50-60 Hz)
- Emergency Shutdown: Yes
- Hepa Filter: Yes
- Filament Runout Sensor: Yes
- Power Loss Fail-Safe: Yes
- Touch Screen: Yes
- Camera: Yes
- USB Port: Yes
- WLAN: No
- Layer Height: 0.04 - 0.5 mm
- Resolution: 0.04 mm
- Shipping Box: 820 mm x 650720 mm x 1080 mm
- Shipping Weight: 130 kg
Claim orders from Stores
You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).
Please wait for an email notification regarding Your order status update.
Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva
Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva
Local delivery in Lithuania
Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.
Local delivery (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 70€ - delivery is free.
Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.
Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.
Payment on delivery (COD) +2.00€ (incl. VAT).
You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.
International delivery pricing through courier service
International shipping prices depend on geographic location:
Latvia - 5.50€ (incl. VAT)
Estonia - 6.50€ (incl. VAT)
other countries - negiotiated individually.
International delivery pricing to Omniva/Venipak parcel terminals
Latvia - 6.00€ (incl. VAT)
Estonia - 8.50€ (incl. VAT)
Payments:
We accept payments via PayPal for orders over 20€.
Paid orders of more than 100€ are shipped for free to Latvia and Estonia.
Product availability status:
Vilnius Store In Stock - the product is at the store, Vytenio str. 20 in Vilnius and can be picked up / purchased at same day;
Kaunas Store In Stock - the product is at the store, Pramonės pr. 4D in Kaunas and can be picked up / purchased the same day;
Central Warehouse In Stock - In stock, product will be shipped in a short time 1-2 work days;
1-2 work days - product will be shipped in a short time - 1-2 business days;
2-3 work days – we don’t have selected product in local warehouse. Shipping time is only 2-3 work days;
3-5 work days – we don’t have selected product in local warehouse. Shipping time is between 3-5 work days;
3-7 work days – we don’t have selected product in local warehouse. Shipping time is between 3-7 work days;
Out of Stock – selected product is sold out at the moment, but you can apply for automatic alert by email when product will be in stock.
