Bondtech CHT Coated Brass Nozzle 0.5mm - 1 pcs

Brand: Bondtech
Product Code: PRM-8876
Availability: 4-7 business days
Planuojama gavimo data po užsakymo: 2025-05-16
33.90€
Ex Tax: 28.02€

Qty

Bondtech CHT nozzles split the filament into 3 thinner strands allowing it to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
Nozzles for 3D printers are made of metal with at least one or a multitude of holes to increase the surface area of the heating walls.
A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel-coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

Main features:

  • Higher melt capacity by increasing the surface area of the heating walls
  • Affordable price
  • Machined with ultra-precision
  • Brass nozzle with Nickel coated surface
  • Follows the RepRap standard, M6 × 1 × 7.5 × 12.5
  • May be used with 1.75 or 2.85 mm hotends

Specification:

  • E-steps value: 400 using 16 micro steps
  • Drive wheels: hardened steel
  • Retraction speed: 35 mm/s
  • Retraction distance (direct drive) for rigid materials: 0.4 mm
  • Retraction distance (direct drive) for soft materials: 3 mm
  • Max. operating temperature: 70 °C
  • Max. tightening torque on the extruder screws is 0.3 Nm
  • Max. tightening torque on the heatsink/cold block screw is 0.6 Nm
  • LGX DD net weight: 218.6 g
  • Package measurements: 80 x 103 x 73 mm
  • Package weight: 269 g

Set includes:

  • Brand: Bondtech
  • Type: RepRap M6 1,75 mm
  • Material: Nickel Coated Brass
  • Diameter: 0,50 mm
  • Packaging: 1