ArduCam HM0360 VGA SPI camera for Raspberry Pi Pico - ArduCam B0319

Brand: ArduCam
Product Code: AN-20256
Availability: 4-6 business days
Planned delivery date after ordering: 2025-05-02
33.80€
Ex Tax: 27.93€

Qty

The HM0360 camera manufactured by ArduCam is a budget and low-cost version of the camera built specifically for the Raspberry Pi Pico and all available development boards with the RP2040 microcontroller. The HM0360 camera uses Himax Imaging's advanced 3.6 µ LED to achieve excellent performance and image sharpness even in low light. Moreover, it consumes only 140 µA in QVGA 2 fps and about 7 mA in VGA 60 fps readout mode. The module also has a built-in oscillator and RTC to reduce the latency of transmitted images. It has a sensor that provides several monitoring options with a programmable interrupt so that the host processor can be put into a low-power standby state until the sensor is notified of movement.

Main features:
  • Ultra Low Power, high sensitivity, low noise VGA sensor
  • Draws from 7.8 mA VGA 60 fps to 240 µA in standby mode
  • Automatic camera wake-up and sleep with the programmable interruption - for reduced performance
  • Built-in high precision oscillator, LDO, auto exposure/gain, ambient light sensor, and zone detection
  • External frame synchronization and stereo camera support
  • Flexible binning
  • 1-track MIPI CSI2 and 8-bit parallel / serial data format supporting 1-bit, 4-bit and 8-bit protocol
  • I2C 2-wire serial interface with serial operation support for fast register access
  • High CRA for low profile module design
Specification:
  • Sensor: HM0360
  • Active resolution: 656x496px
  • Pixel size: 3.6 x 3.6 µm
  • Pixel technology: BSI
  • Optical format: 1/6'' (diagonal 2.88 mm)
  • Color Filter Chart: Bayer, monochrome
  • The frame rate at 24 MHz: QQVGA 1 fps to VGA 60 fps
  • Readout modes: Full (VGA), Bin2 (Mono) / Sub2, Bin4 (Mono) / Sub4, Fast ROI
  • S/N Ratio: 45.5 dB maximum
  • Dynamic Range (1x): 85 dB
  • Sensitivity: 5.5 V / Lux-s/530 nm, 15 V / (uW-cm-2s)/850 nm
  • CRA: 35.74Âş maximum
  • Supply voltage:
    • analog: 2,8 V
    • digital: 1.2 V (optional 1.8 V LDO)
    • I/O: 1.8 V to 3.0 V
  • Reference Clock (EXTCLK): 6 MHz to 24 MHz
  • Built-in internal oscillator
  • Serial interface: I2C
  • Module dimensions with the camera: 33.12 x 23.05 mm
  • Mounting hole spacing: 28.56 x 20.74 mm
Set includes:
  • ArduCam HM0360 VGA SPI camera - for Raspberry Pi Pico - ArduCam B0319
  • Female to female connecting cables - 8 pieces