2-channel RCD-2C control unit - 2 x remote control

Technical specifications:

• Range of permissible supply voltages: from 12 to 24VDC (stabilized)
• Maximum supply current: 80mA
• Supply current in static operation: 9mA
• Carrier frequency: 433.92MHz (quartz stabilized)
• Operating temperature: -20°C ~ 60°C
• Outputs: NC–NO relay (10Amax)
• Range: up to 100m (depending on conditions)
• Dimensions: 57.4mm x 40.6mm x 18.9mm
• Number of supported remote controls: maximum 50 remote controls

All electrical connections must be made with the power disconnected, exercising extreme caution. The control unit should be housed in an enclosure providing adequate protection against moisture and sunlight. Avoid placing the device in metal housings, as this would result in strong shielding and a significant reduction in range. Connect the power supply for the control panel using a two-wire cable with a cross-section of 0.35 mm2, including a 100mA fuse in series. Be meticulous in maintaining the correct polarity of the supply voltage to prevent immediate damage to the control unit. The electrical connections for devices controlled by the control unit should be made using copper wires with a cross-section of 0.75 mm2. Exercise careful installation to avoid accidental short circuits and equipment damage.

Programming Remote Controls and Setting the Operating Mode:

Briefly press the button on the control unit (the LED will illuminate), then press the appropriate button on the remote control based on the selected operating mode.

The control unit can operate in one of three operating modes:

State change (commonly used for remote switches).

Bistable (commonly used for DC motor control).

Monostable (commonly used for impulse triggering of electrical devices, DC motor control, electric lock control). For remote controls with a flap, the operating mode of the device is set during the programming procedure by pressing the button on the remote control: upper left (state change), upper right (bistable), or lower left (monostable). During normal device operation, the upper buttons of the remote control are used to switch relays: upper left (PK1 relay), upper right (PK2 relay). Erasing the remote control memory in the control unit is done by holding the button on the control unit for about 5 seconds (the LED will blink about 10 times and then go off). If the range is unsatisfactory, straighten the coiled antenna and position the receiver as high as possible above the ground and away from large metal objects.

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

Paid orders of more than 150€ are shipped for free to Latvia and Estonia.

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.

Product availability status:

Vilnius Store In Stock - the product is at the store, Vytenio str. 20 in Vilnius and can be picked up / purchased at same day;

Kaunas Store In Stock - the product is at the store, Pramonės pr. 4D in Kaunas and can be picked up / purchased the same day;

Central Warehouse In Stock - In stock, product will be shipped in a short time 1-2 work days;

1-2 work days - product will be shipped in a short time - 1-2 business days;

2-3 work days – we don’t have selected product in local warehouse. Shipping time is only 2-3 work days;

3-5 work days – we don’t have selected product in local warehouse. Shipping time is between 3-5 work days;

3-7 work days – we don’t have selected product in local warehouse. Shipping time is between 3-7 work days;

Out of Stock – selected product is sold out at the moment, but you can apply for automatic alert by email when product will be in stock.