Sort By:
Availability:
Show:
Easy Servo CS-D508 servo stepper controller - 8A Leadshine
- Step-directional or CW/CCW control modes - Supply voltage 20-50 VDC - Maximum output current 8.0A - Power supply for NEMA 14, 17, 23 and 24 2-phase stepper mo..
124.80€
Vilnius Store Out of Stock

Kaunas Store Out of Stock

Central Warehouse In Stock
HSS60 servo stepper controller 24-50V 5A
HSS60 is a 2-phase servo step controller from the Nema 24 series. It is based on a new generation 32-bit DSP processor and vector control technology, which avo..
80.20€
Vilnius Store Out of Stock

Kaunas Store Out of Stock

Central Warehouse In Stock
DM860H 7.2A stepper motor controller, AC/DC
The DM860H controller is an economical, high-performance microstepping controller based on the latest technical achievements. It is adapted to control 2-phase ..
52.20€
Vilnius Store In Stock

Kaunas Store In Stock

Central Warehouse Out of Stock
DM542 stepper motor driver - 4.2A
Maximum signal frequency up to 200 kHzMicrostep up to 1/128 (adjustable), up to 25,600 control pulses per motor revolutionPossibility to divide the step on a de..
23.20€
Vilnius Store In Stock

Kaunas Store Out of Stock

Central Warehouse In Stock
General Driver board - multifunctional robot controller - ESP32 - WiFi, Bluetooth, ESP-NOW - Waveshare 23730
The General Driver board is a multifunctional driver based on the ESP32-WROOM-32 module, which offers a wide range of possibilities and allows you to expand the..
40.00€
Vilnius Store Out of Stock

Kaunas Store Out of Stock

Central Warehouse In Stock
Manual stepper motor controller - 5-12V
The module allows manual control of stepper motor movement. It works in 4 modes. A potentiometer allows you to set the speed of the motor rotation and 2 buttons..
-25%
15.60€ 11.70€
Vilnius Store In Stock

Kaunas Store Out of Stock

Central Warehouse Out of Stock
BlackBox Motion Control System X32
Welcome to the future in CNC machine control.  Our all-in-one plug and play OpenBuilds BlackBox Motion Control System is revolutionizing CNC. CNC Routers, ..
390.00€
Vilnius Store Out of Stock

Kaunas Store In Stock

Central Warehouse Out of Stock
S6609 3D Printer StepStick Stepper Motor Driver 3A UART
S6609 is similar to TMC2209 but can tolerate a higher current. Features:  Ultra quiet Large heat sink, good heat dissipation Parameters: Default current: ..
-35%
9.50€ 6.17€
Vilnius Store In Stock

Kaunas Store In Stock

Central Warehouse In Stock
Mini MX1508 driver module for DC motors - double - Arduino
The Mini MX1508 driver module is a motor driver that allows you to control two DC motors. The system can be controlled using Arduino by connecting its pins to t..
2.40€
Vilnius Store Out of Stock

Kaunas Store Out of Stock

Central Warehouse In Stock
Soft start module - 250V 24A - slow soft start - JRR-01
Soft start module - soft start - for a slow start for power tools. By reducing the starting current, the module eliminates sudden jerks and initial heavy overlo..
8.70€
Vilnius Store In Stock

Kaunas Store In Stock

Central Warehouse In Stock
PWM driver module - 400W 15A 36V - MOSFET
The module is equipped with 2 MOSFET transistors. Dedicated to controlling devices using a PWM signal (DC motors, valves, etc.)Specification:Max. power 400 WMax..
2.40€
Vilnius Store Out of Stock

Kaunas Store Out of Stock

Central Warehouse In Stock
Power regulator module AC 230V 2000W with a potentiometer
The SCR voltage and power regulator controls the operating voltage in the range from 10V to 230V AC. The power controller has a built-in potentiometer for smoot..
5.00€
Vilnius Store In Stock

Kaunas Store Out of Stock

Central Warehouse In Stock
TMC2208 V2.0 3D Printer StepStick Stepper Motor Driver 2A UART
TMC2208 has most of TMC2209 features with the notable exceptions of Linear Advance and sensor-less homing. Features:  Ultra quiet Large heat sink, good hea..
6.10€
Vilnius Store In Stock

Kaunas Store In Stock

Central Warehouse In Stock
XY-PWM1 signal generator module
PWM output can set frequency and duty cycle respectively.Frequency is divided into four intervals:1. XXX  The smallest unit is 1Hz, and the value range is ..
11.80€
Vilnius Store In Stock

Kaunas Store In Stock

Central Warehouse Out of Stock
DRV8256P - single-channel motor controller 48V/1.9A - Pololu 4039
A small, single-channel DRV8256P motor driver was created by Pololu. The module is powered from 4.5 V to 48 V. Continuous current per channel is 1.9 A (momentar..
23.00€
Vilnius Store Out of Stock

Kaunas Store Out of Stock

Central Warehouse In Stock
Motor controller with overload overcurrent protection DC 12V
Motor controller with overload overcurrent protection DC 12V.Specification:Working Voltage: DC 12V Working Current: (Normal mode) standby current 22mA, working ..
-27%
17.60€ 12.83€
Vilnius Store In Stock

Kaunas Store In Stock

Central Warehouse In Stock
Offline Controller Board 3 Axis Stepper Motor
Offline Controller Board 3Axis Stepper Motor.Feature of Control Board:Connection: USBAxis: 3 Axis, XYYZStepper Motor Driver: 3 Pcs A4988Applicable: 2-phase 4-wi..
-25%
67.50€ 50.63€
Vilnius Store In Stock

Kaunas Store Out of Stock

Central Warehouse Out of Stock
DFRobot L298N, two-channel motor controller, 12 V / 2 A
Two-channel direct current motor controller based on the L298N system, which enables control of the direction of rotation and speed. Thanks to ARK screw connect..
-22%
21.00€ 16.48€
Vilnius Store Out of Stock

Kaunas Store Out of Stock

Central Warehouse In Stock
PCA9685, 16-channel servo driver, 12-bit PWM I2C, Adafruit 815
16-channel PWM generator useful when microcontroller outputs are missing. It allows, among other things, to control servos, regulate the speed of motors or chan..
27.60€
Vilnius Store In Stock

Kaunas Store Out of Stock

Central Warehouse Out of Stock
Motor regulator DC 12-40V/10A/400W - with a speed control knob
A simple controller with an integrated rotary potentiometer to control the speed of a DC motor up to 400 W. Powered from 12 V to 40 V.Specification:Adjustment r..
8.70€
Vilnius Store Out of Stock

Kaunas Store Out of Stock

Central Warehouse In Stock
Showing 1 to 20 of 252 (13 Pages)